Demo version of AlfaOBD software for diagnostics of the cars produced by FCA: Alfa-Romeo, Fiat, Lancia, Dodge, RAM, Chrysler, Jeep. Peugeot (Boxer), Citroen (Jumper) are also covered. Although the software is primarily targeted for car owners, it provides the features of professional scanners. Many dealer-level diagnostic and configuration procedures are available in the full version.
NOTE: if your Android device is not in the list of compatible devices on Google Play and you cannot install or upgrade your installation please contact info@alfaobd.com.
Make sure you have a compatible OBD interface. For the list of supported OBD interfaces see www.alfaobd.com.
NOTE: If AlfaOBD can not connect to a car ECU with the message "Interface reports NO DATA" or "Interface reports CAN ERROR" it most probably means your interface is not compatible or defective.
For the details of configuration of connection to interface and car see application help available on http://www.alfaobd.com/AlfaOBD_Android_Help.pdf
AlfaOBD features include:
- native support of Electronic control units used in Fiat group cars. Native support differs AlfaOBD from many other diagnostic applications providing only limited generic OBDII support of Fiat group cars.
- monitoring various dynamic parameters of engine, gearbox, ABS, climate control ECUs and graphical presentation as plots
- reading of static data: ECU identification, system status, fault codes with probable causes and environment information where applicable
- clearing of fault codes
- (Full version only) active diagnostics and configuration procedures for various equipment controlled by engine, gearbox, body computer, climate control, ABS, airbag, code control and other ECUs
- (Full version only) electronic key and RF remote control programming
AlfaOBD supports ELM327 and OBDKey Bluetooth interfaces on all Bluetooth-enabled Android devices and ELM327/OBDKey WLAN interfaces on rooted devices only. For details of configuration of connection to interface and car see application help.
Application available in Czech, English, French, German, Hungarian, Italian, Polish, Portuguese, Russian, Turkish, and Spanish. Languages are selectable via Setting.
The limitations of the demo version are:
- Application run time limit of 15 minutes. Application reverts back to the first screen after 15 minutes of connection to a control unit.
- No active diagnostic procedures available
- The number of scanned gauges is limited by four
- The number of monitored parameters is limited by four
All other features are operational. No time limit is imposed on the application.
NOTE: If plots are not updated, make sure that "Force GPU rendering" is off in "Settings"->"Developer Option".
Demoversion von AlfaOBD Software für die Diagnose der Autos produziert von FCA: Alfa-Romeo, Fiat, Lancia, Ausweichen, RAM, Chrysler, Jeep. Peugeot (Boxer), Citroen (Jumper) werden ebenfalls behandelt. Obwohl die Software in erster Linie für Autobesitzer ausgerichtet ist, bietet es die Eigenschaften von professionellen Scannern. Viele Händler-Level-Diagnose- und Konfigurationsprozeduren sind in der Vollversion verfügbar.
Hinweis: Wenn Ihr Android-Gerät ist nicht in der Liste der kompatiblen Geräte bei Google Play und Sie können Ihre Installation wenden Sie sich bitte info@alfaobd.com nicht installieren oder aktualisieren.
Stellen Sie sicher, dass Sie eine kompatible OBD-Schnittstelle verfügen. Für die Liste der unterstützten OBD-Schnittstellen siehe www.alfaobd.com.
HINWEIS: Wenn AlfaOBD kann nicht auf ein Auto ECU verbindet mit der Meldung „Schnittstelle meldet NO DATA“ oder „Interface Berichte CAN-Fehler“ es höchstwahrscheinlich bedeutet, dass Ihre Schnittstelle nicht kompatibel oder defekt ist.
Für die Details der Konfiguration der Verbindung zum Interface und Auto-Anwendung Hilfe zur Verfügung siehe http://www.alfaobd.com/AlfaOBD_Android_Help.pdf
AlfaOBD Funktionen gehören:
- native Unterstützung von elektronischen Steuergeräten in Fiat-Gruppe Autos. Native Unterstützung unterscheidet AlfaOBD von vielen anderen diagnostischen Anwendungen nur begrenzt generische OBDII Unterstützung der Fiat-Gruppe Autos bereitstellt.
- Überwachung verschiedene dynamische Parameter von Motor, Getriebe, ABS, Klimaanlage ECUs und grafischer Darstellung als Plots
- Lesen von statischen Daten: ECU Identifikation, Systemstatus, Fehlercodes mit wahrscheinlichen Ursachen und Umgebungsinformationen ggf.
- Löschen des Fehlercodes
- (nur Vollversion) aktive Diagnose- und Konfigurationsverfahren für verschiedene Geräte von Motor gesteuert, Getrieben, Bordcomputer, Klimaautomatik, ABS, Airbag, Code-Steuerung und anderen ECUs
- (nur Vollversion) elektronischer Schlüssel und Funk-Fernbedienung Programmierung
AlfaOBD unterstützt ELM327 und OBDKey Bluetooth-Schnittstellen zu allen Bluetooth-fähigen Android-Geräte und ELM327 / OBDKey WLAN-Schnittstellen auf verwurzelte Geräte vorgesehen. Einzelheiten zur Konfiguration der Verbindung zum Interface und Auto-Anwendung Hilfe.
Anwendung in Tschechisch, Englisch, Französisch, Deutsch, Ungarisch, Italienisch, Polnisch, Portugiesisch, Russisch, Türkisch und Spanisch. Sprachen sind über Einstellung wählbar.
Die Einschränkungen der Demo-Version sind:
- Anwendungslaufzeitbegrenzung von 15 Minuten. Anwendung kehrt zurück zu dem ersten Bildschirm nach 15 Minuten der Verbindung zu einer Steuereinheit.
- Keine aktiven Diagnoseverfahren zur Verfügung
- Die Anzahl der gescannten Lehren wird begrenzt durch vier
- Die Anzahl der überwachten Parameter wird begrenzt durch vier
Alle anderen Funktionen sind in Betrieb. Keine Frist für die Anwendung auferlegt.
HINWEIS: Wenn Plots nicht aktualisiert werden, stellen Sie sicher, dass „GPU-Rendering erzwingen“ ist in „Einstellungen“ aus -> „Entwickler Option“.